The VIX3000+ Line Interactive UPS
Systems are designed to provide
cost effective power protection.
Small and compact the VIX3000+
series provide battery backup,
voltage stabilisation and surge
protection for electronic systems.
Ideal for desktops, EPOS, CCTV,
and any application with switch
mode power supply loads
- Touch Screen LCD provides UPS information
- Compact Size
- Microprocessor control for high reliability
- Boost and Buck AVR for voltage stabilisation
- Auto restart on AC recovery
- Off mode charging
- Cold start Function
- HID compliant device
Input | 162-290V 50/60Hz |
---|
Max Power (Watts) | 600 |
---|
Technology | Line Interactive (VI) |
---|
Inverter Waveform | Non-Sine |
---|
Battery Capacity | 168 Watt-hours |
---|
Input Connector | IEC C14 |
---|
Output Connectors | 4xIEC C13 |
---|
Physical WxDxH mm | 130x320x182 |
---|
Weight (kg) | 8.0 |
---|
Line Interactive
Line Interactive VI (Voltage Independent) technology. Will buck and boost the input voltage to provide Automatic Voltage Regulation (AVR). Has small break in power when changing between mains and battery operation.
Internal Batteries
These units contain internal batteries. Refer to datasheet for type and quantity.
HID Compliant
Human Interface Device USB Port. Attached computer can recognise UPS is attached and use operating system internal functions to act on UPS events without the need to install additional software.
IEC Connections
Input and Output receptacles are IEC. UPS rated at 3KVA will have IEC320 C19 outlets and C20 inlet. Below this is C13/C14. Refer to datasheet for type and quantity for each model.
Square Wave Inverter
The unit inverter is square wave and care should be taken on what load types it protects.
Touch Screen LCD
Unit has a touch screen LCD to display UPS parameters one at a time. Eg input voltage, output voltage, load and battery %.
Tower
The unit is a freestanding unit.
USB Interface
The unit has a USB port for communication with an attached computer
Quiet Operation
Unit is quiet in normal operation.