1000W QS Series Silent UPS System / AC ReGenerator (Schuko)

VFI1000QS-EU
VFI1000QS, AC Power ReGenerator with UPS Support. Near silent operation. High quality stable output waveform with built in battery support. Schuko Outlets. HiD USB, Intelligent Slot. Rack or Tower Mount. 230V nominal, 1000W output.

£990.00

[£825.00 exVAT]

We are currently out of stock of this product. Please Contact Us for lead time.

The new VFI1000QS AC Power ReGenerator with UPS Support.

The unit provides a fully AC ReGenerated supply to provide a high quality output waveform, perfectly stable and free from any power contaminants.

Fitted with unique fan speed control that ramps up fan speeds only as and when needed, the VFI1000QS is practically inaudible for most A/V applications. When running at full speed the fan noise is still whisper quiet.

Unlike it's predecessor the VFI1000QS has built in batteries for UPS support, has Schuko socket outlets (of which one is programmable when on battery power), and can be mounted horizontally or vertically.

Available from January 2021

Input	162-290V 50/60Hz
Max Power (Watts)	1000
Technology	Online (VFI)
Inverter Waveform	Sinewave
Battery Capacity	432 Watt-hours
Input Connector	IEC C20
Output Connectors	Schuko x2
Physical WxDxH mm	438x510x88
Weight (kg)	19.5

Emergency Power Off
Has an Emergency Power Off port to allow rapid shutdown of UPS in the event of an emergency.

HID Compliant
Human Interface Device USB Port. Attached computer can recognise UPS is attached and use operating system internal functions to act on UPS events without the need to install additional software.

Intelligent Slot
The unit contains an ″Intelligent Slot″ for the connection of either a relay card or a network SNMP card, but not both. The relay card allows the UPS to transmit status to a remote alarm panel or Building Management System, whereas the SNMP card allows monitoring of the UPS over a LAN or WAN network.

LCD Display
A comprehensive LCD not only displays UPS parameters but allows for UPS configuration and adjusting settings.

Load shed when on battery
Has the ability to Load Shed by switching off a bank of output sockets after a set time, allowing runtime to be extended for critical devices.

Rack/Tower Mountable
The unit can be fitted into a standard server 19inch rack, but also can be mounted vertically. Support brackets are provided to do this. Additional battery cabs are provided with support extenders.

Sine Wave Inverter
The unit inverter is sine wave for maximum application compatibility.

Hot Swap
The unit batteries are contained within a removable battery tray allowing the batteries to be exchanged simply and quickly and in many cases without having to power down the load.

UK Socket Outlets
Output receptacles are UK sockets.

Online Double Conversion
Online Double Conversion VFI (Voltage Frequency Independent) technology. Provides a fixed output voltage and frequency that can be adjusted and has no-break when changing between mains and battery operation.

Quiet Operation
Unit is quiet in normal operation.

Adjust Load %AC LoadRuntime

NOTE: The runtimes shown here are calculated. Actual runtimes may vary due to fluctuating loads, environmental factors, battery age, intitial charge etc., so this table should be treated as approximate.