Fully featured online double conversion UPS in compact tower format, with dual 110V or 230V input and fixed 230V nominal output.
Built in isolation transformer provides the highest degrees of power protection in addition to added protection against electric shock. Removes load earth leakage from source. Recommended for industrial and laboratory applications.
Unit contains 6x12V 9Ah internal batteries but runtime can be extended with the addition of matching battery cabinets.
High Frequency design provides the highest degrees of power protection and performance.
Features
- Isolated - input isolation transformer. Provides high degree of surge protection, eliminates leakage current, helps protect against electric shock.
- High frequency, double conversion on-line technology providing the highest degrees of power protection
- High 0.9 output power factor reducing possibility of overload and offering maximum compatibility
- Wide input voltage range allowing operation without reverting to battery extending uptime and maximising battery life.
- Emergency Power Off facility for safety
- Smart USB / RS232 communications with monitoring software
- Optional relay or SNMP communications card through Intelligent Slot for full communications
- Battery Packs can be added to extend runtime
| Input | 100-300VAC |
|---|
| Max Power (Watts) | 2700 |
|---|
| Technology | Online (VFI) |
|---|
| Inverter Waveform | Sinewave |
|---|
| Battery Capacity | 648 Watt-hours |
|---|
| Input Connector | Hardwired |
|---|
| Output Connectors | 1xIEC C13, 1xIEC C19, Hardwired |
|---|
| Physical WxDxH mm | 190x525x448 |
|---|
| Weight (kg) | 56.0 |
|---|
Internal Batteries
These units contain internal batteries. Refer to datasheet for type and quantity.
Emergency Power Off
Has an Emergency Power Off port to allow rapid shutdown of UPS in the event of an emergency.
IEC Connections
Input and Output receptacles are IEC. UPS rated at 3KVA will have IEC320 C19 outlets and C20 inlet. Below this is C13/C14. Refer to datasheet for type and quantity for each model.
Intelligent Slot
The unit contains an ″Intelligent Slot″ for the connection of either a relay card or a network SNMP card, but not both. The relay card allows the UPS to transmit status to a remote alarm panel or Building Management System, whereas the SNMP card allows monitoring of the UPS over a LAN or WAN network.
LCD Display
A comprehensive LCD not only displays UPS parameters but allows for UPS configuration and adjusting settings.
Load shed when on battery
Has the ability to Load Shed by switching off a bank of output sockets after a set time, allowing runtime to be extended for critical devices.
Sine Wave Inverter
The unit inverter is sine wave for maximum application compatibility.
Tower
The unit is a freestanding unit.
Isolation Transformer
Contains an internal isolation transformer for safety and noise rejection performance.
Online Double Conversion
Online Double Conversion VFI (Voltage Frequency Independent) technology. Provides a fixed output voltage and frequency that can be adjusted and has no-break when changing between mains and battery operation.
