The VFI-RT+ Uninterruptible Power Supplies are the benchmark in power
protection performance. True online double conversion technology
provides the highest degrees of power protection making the UPS
suitable for a wide variety of mission critical equipment and infrastructure.
The VFI-RT+ can be mounted in a 19” rack installation and occupies only
2U of rackspace. Alternatively, the unit can be vertically mounted with the
supplied support brackets.
The high output power factor of 0.9 removes the risk of overload on
power factor corrected loads. The high efficiency of the VFI-RT+ reduces
the need for additional cooling requirements, reducing operating costs
and can be set into even higher efficiency ECO mode operation if
required.
Additional battery packs can be added to extend runtime with the added
benefit of adjustable current high capacity chargers, allowing large battery strings to
be recharged in a timely fashion. These can be added at a later date as
and when required.
SNMP / Relay Port for added
communication options.
- VFI (Online Double Conversion) Technology
- Matching Battery Cabs
- High Capacity Charger
- Adjustable Charge Current
- Adjustable Output Voltage
- Frequency Conversion
Mode
- Intelligent Port for SNMP /
Relay Options
- Rack/Tower Format
Please note each battery pack is approx 70kg and will require 2 man lift. Alternatively, the battery pack can be sent out in kit form for in-situ assembly.
| Input | 176-300VAC 50/60Hz |
|---|
| Max Power (Watts) | 6000 |
|---|
| Technology | Online (VFI) |
|---|
| Inverter Waveform | Sinewave |
|---|
| Battery Capacity | 8640 Watt-hours |
|---|
| Input Connector | Hardwired |
|---|
| Output Connectors | Hardwired |
|---|
| Physical WxDxH mm | 410x600x620 |
|---|
| Weight (kg) | 269.0 |
|---|
High Capacity Charger
High Capacity Internal Charger for the quick and effective recharge of attached battery packs.
Emergency Power Off
Has an Emergency Power Off port to allow rapid shutdown of UPS in the event of an emergency.
Intelligent Slot
The unit contains an ″Intelligent Slot″ for the connection of either a relay card or a network SNMP card, but not both. The relay card allows the UPS to transmit status to a remote alarm panel or Building Management System, whereas the SNMP card allows monitoring of the UPS over a LAN or WAN network.
LCD Display
A comprehensive LCD not only displays UPS parameters but allows for UPS configuration and adjusting settings.
Rack/Tower Mountable
The unit can be fitted into a standard server 19inch rack, but also can be mounted vertically. Support brackets are provided to do this. Additional battery cabs are provided with support extenders.
Sine Wave Inverter
The unit inverter is sine wave for maximum application compatibility.
Online Double Conversion
Online Double Conversion VFI (Voltage Frequency Independent) technology. Provides a fixed output voltage and frequency that can be adjusted and has no-break when changing between mains and battery operation.
- ViewPower Software CD
- USB Lead
- Rack Ears
- Vertical Support Brackets
